According to experts, radon is a dangerous gas to have in your building. When people get exposed to this gas, they can come down with serious illnesses. For this reason, homeowners are advised to remove radon from their properties.
Radon mitigation involves techniques for lowering radon levels. Depending on your preferred technique, you might use specialized fans for the task.
What if your radon fan falls apart? Can you replace it with hydroponic blowers? If you are interested in using the blowers for radon mitigation, this article will offer the required information.
Can Hydroponic Blowers be Used for Radon Mitigation?
Yes, you can use hydroponic blowers for radon mitigation. However, you cannot use them for large spaces. With this in mind, it would help if you used specialized radon fans.
Hydroponic Blowers
Also known as inline fans, hydroponic blowers provide ventilation for several functions. With this in mind, you can use a hydroponic blower to remove odors and draw out hot air in several spaces.
Most times, these devices can be found in grow tents, AV equipment, and closets servers. You can also use them for radon mitigation.
As expected, a top-quality hydroponic produce an incredible amount of air without making noise. Also, they boast of a tough build that can withstand their functions.
Hydroponic blowers tend to work like exhaust fans. But when it comes to their designs, these items do not share the same features.
Before a hydroponic blower can work, it will have to be installed and switched on. Besides, some parts of the fam will have to be exposed outwards.
To install hydroponic blowers, the blowers are not near the ceiling/ roof space.
What is Radon Mitigation?
Radon mitigation is a technique used to reduce the radon levels in a space. Apart from using radon mitigation in buildings, you can use this activity in radon-filled water.
To lower the radon levels in an area, you will need different types of radon mitigation systems. However, the foundation of the affected building will determine the perfect suitable technique for the plant.
For a radon mitigation system to work, it should come with a fan that draws air from the ground. Then the device will dump it outdoors through an exhaust pipe. For the best results, the pipe is installed at either the outer or inner part of the building.
When Should You Use a Hydroponic Blower?
A hydroponic blower or inline fans might not be the first choice for radon mitigation. But there are places where it can offer incredible results. So if you have a hydroponic blower, you can use it in these locations.
- Grow Tents
In a grow tent, inline fans or hydroponic blowers help with the circulation of air. Also, the device uses a vent duct to swap air between the exterior and interior parts of the tent.
Before you can use a hydroponic blower in a grow tent, ensure it has the right speed for your space. With this in mind, choose a hydroponic blower that promises excess speed.
- AV Equipment
If you want to ventilate a room with AV equipment, an inline fan stands as an ideal option. You can even use it to provide air in storage places for these devices. As you install an inline fan for these places, look for something that offers the best features.
- Large Bathrooms
An inline or hydroponic fan is perfect for stuffy bathrooms. As expected this device has enough features that suit this task.
For instance, you can install the fan and make it as silent as possible. For this reason, you can turn on the device and still relax in the bath.
The Best Fan for Radon Mitigation
Instead of using a hydroponic blower for radon mitigation, consider looking for devices that are designed for such tasks. So if you want to make your building safe from radon, you will have to get a top-quality radon fan.
If you want to choose a good fan for radon mitigation, you should look out for the following features:-
Size of the building: Before you get a radon fan, you will have to consider the size of the building. With this in mind, you will not have to use a large fan for a very small room. Also, you can’t clear out a large radon-filled room with smaller models.
The Radon Level of the Building: Asides from the size of the building, you should also consider the radon levels especially if you want to get a radon fan. So if your home has been contaminated for many years, you will not use a model that is ideal for short-term use.
The Type of the Building: Before getting a radon fan, you should also look at the type of building that needs this device. After all, skyscrapers do not have the same requirements as a townhouse or a single room.
How to Use a Radon Mitigation System
Radon mitigation fans can reduce the radon in your home. But if you don’t install the device, you will end up with more radon in the building.
To place the fan in your home, you will need a professional installer. If you follow this step, you can enjoy everything the fan has to offer. Besides, a poorly set-up fan can lead to excess radon.
Here are the basics steps for dealing with mitigation via a fan. Do not use these steps as they are for reference purposes.
- Test the radon levels in your building.
- Head to the basement slab
- Make a hole that suits a 3-inch pipe
- Get a drill-powered drill to loosen the soil under the slab.
- Remove the dirt with a vacuum.
- Prepare a pathway for a 3-inch pipe. Ensure that space runs from the house to the attic. Secure the joints with glue and remember to provide the pipes with straps.
- Insert the lower part of the pipe into the hole in the slap. Make sure that the pipe does not go past a few inches.
- Head to the space between the outer surface of the pipe and the slab. Then insert a rod into space and seal properly with hydraulic cement.
- Get a working radon fan in the attic. To power this item, have a socket in the same location. Next, connect the fan to the pipe.
- Check if the system is active by running with a manometer. You should install this gauge on the pipe
- Drill some holes in the basement wall. Then smoke is passed through the holes to test the system. After performing the test, use hydraulic systems to cover the holes.
Tips on for Using a Hydroponic Blower
There are different ways that you can use your hydroponic blower. Here are some tips that can improve your use of this device.
Do not Depend on Over-Sized Fans
To get the right amount of ventilation, you might feel like getting a giant-sized hydroponic blower. But since some large models do not offer enough air, you should expect more ventilation from the smaller models.
Start by installing several small fans in the grow room. After using this tip, you can expect better airflow than with large hydroponic blowers.
Increase the Humidity in Your Grow Room
Have you ever wondered about an easier way to increase humidity? Well, you can combine a humidifier with a hydroponic flower. To perform this task, simply direct the switched-on fan to the humidifier mist.
Do Not Point Air at Plants
In a hydroponics setting, you might be tempted to direct the fan at the crop. But as this activity drys out the plants, you should look for alternatives.
For instance, point the fan to the wall or ceilings. You might also install Diffuse Air to keep the plants from drying up.
Think about Hooks
In a grow room, it is normal to find tight spots. As expected, these areas might not offer enough space to install the growing fan. For this purpose, you should install the fans with hooks that hold up this item.
Do Not Turn Off the Fan
When you use a fan, do not switch it off. Instead, allow it to run as much as possible. If you turn off the fans regularly, you might have to deal with sick plants.
Cool Your Tools with the Fan
With regular use, some hydroponics equipment tends to become heated. But if you send some air towards these items, they will become cooler.
Wrapping Up
Hydroponic blowers can be used for radon mitigation. But before it might have any impact, you will have to use it in smaller rooms.
To completely deal with radon mitigation, you should stick with specialized radon fans. When you install them properly, you can expect a low amount of radon.
If you want to install a radon fan, do not turn it into a DIY project. Instead, ring up an expert installer to handle the project. Also, perform a test to check the radon levels in the building to determine if you need to use a fan.